|
|
|
|
|
Accessories
|
|
Greasing Couplers |
|
|
|
KY Couplers
Standard supergrip coupler supplied with all Macnaught grease guns. Designed to fit most grease nipples and grease guns. Can be purchased separately or in packets of 8 (KY-8). Threads 1/8" BSP or NPT(F) |
|
KDN right angle needlepoint coupler
Ideal where access to the grease nipple is minimal. |
|
KDR right angle coupler
For use in spaces when the area above the nipple is limited. |
|
KDS right angle coupler
A slightly shorter version of the KDR. Along with the KDN and KDR, it
can be used with a flexible extension |
|
KSR standard buttonhead coupler
For use on plant and machinery fitted with 5/8” buttonhead nipples.
Length 72 mm (23/4"). |
|
KGR giant buttonhead coupler
For use on plant and machinery fitted with 7/8" buttonhead nipples.
Length 85mm (33/8") |
|
KRV pressure release valve
Helps to prevent nipples from breaking off and couplers from splitting.
Recommended for use with the K6 Minilube, P3 Powerlube, and P6 and
P8 Maxilubes. |
|
KZD needlenose coupler
Used when nipples are recessed and standard couplers would
meet with interference from surrounding components (universal
joints, etc). Length 93 mm (33/4"). |
|
KZDXL straight needle point coupler
Ideal for greasing the bearings on four wheel drive vehicles.
Length 120 mm (43/4"). |
|
KZE concave nipple coupler
Used when vehicles are fitted with special nipples or, in some
cases, when normal nipples are damaged. Length 60 mm (21/4"). |
|
KZX concave nipple coupler
A similar coupler to the KZE but fitted with a rigid extension.
Length 200 mm (8"). |
|
KN grease injector needle
Small needle used to inject sealed bearings and small lubrication
points with grease when no grease nipples are present. Length
64 mm (21/2"). |
|
KZHY hyperdermic needlepoint coupler
Ideal for use on bearings fitted with rubber dust covers.
Length 130 mm (51/8in).
|
|
KZLN 45° needlepoint coupler
A choice of four 30cm straight needlepoint couplers.
The first 3 are ideal for use with aircrafts, while the
KZLNS can be used with four wheel drive
vehicles. |
|
KZLNJ needlepoint coupler
A choice of four 30 cm straight needlepoint couplers.
The first 3 are ideal for use with aircrafts, while the
KZLNS can be used with four wheel drive
vehicles. |
|
KZLNR 90° needlepoint coupler
A choice of four 30 cm straight needlepoint couplers. The
first 3 are ideal for use with aircrafts, while the KZLNS
can be used with four wheel drive vehicles. |
|
KZLNS needlepoint coupler
A choice of four 30 cm (12") straight needlepoint couplers.
The first 3 are ideal for use with aircrafts, while the
KZLNS can be used with four wheel drive vehicles. |
|
KZSNR 90° needlepoint coupler
An 110mm (41/4") needlepoint coupler with a 90° bend
at the end. |
|
ZSB swivel
A 360° swivel supplied either separately or with the B2
Booster Gun. Threads 1/8" NPT (M) x 1/4" NPT (F).
Also available:
ZSX
Threads 1/8" NPT (M) x 1/4" NPT (F).
ZSY
Threads 1/4" NPT (M) x 1/4" NPT (F). |
|
|
|
|